top of page

Load data for .300 AAC Blackout + .308 | 132gr | Brenneke TIG nature

Recommended Powder(s): Hodgdon LilGun

.300 AAC Blackout + .308 | 132gr | Brenneke TIG nature

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:
.308 | 132gr | Brenneke TIG nature
Bullet Weight:
132gr | 8.6g
Bullet Diameter:
0.308" | 7.82mm
Bullet Length:
1.240" | 31.5mm
Caliber:
.300 AAC Blackout load data
Case Length (l3):
1.367" | 34.7mm
Cartridge Length (C.O.L.):
2.226" | 56.5mm
Seated Depth:
0.381" | 9.7mm
Shank Seated Depth:
0.247" | 6.3mm
Case Capacity:
25.1 Grains of Water | 1.63 cm³
Primer Size:
Small Rifle (SR)
Max. allowed Pressure:
50763 psi | 3500 bar
LID:
LID_B1170_C348
Last updated:
2025-01-01
Recommended Twist Rate:
1:11 - 1:9

Load data for 26 loads in caliber .300 AAC Blackout with .308 | 132gr | Brenneke TIG nature bullet and 13 powders such as Hodgdon LilGun. The key underlying parameters are shown in the table above.

  • Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service

    Questions regarding the load data: Please read the information in the next tab "Explanations".

  • No data yet

  • We recommend you limit powder range to relevant brands to speed up re-calculation of results

    Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

    Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads,  >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.

    .

    Loading_icon.gif

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AR 2205
<<locked>>
96%
45397
89%
**44
99%
[Accurate 5744]*
<<locked>>
93%
44643
88%
**06
94%
Accurate No. 11 FS
<<locked>>
94%
44976
89%
**13
97%
Hodgdon LilGun 👍
<<locked>>
91%
44730
88%
**95
100%
[IMR 4227]*
<<locked>>
96%
35027
69%
**52
93%
[Lovex D060]*
<<locked>>
96%
44643
88%
**06
94%
[Lovex D063]*
<<locked>>
92%
44556
88%
**93
93%
Lovex S040
<<locked>>
89%
45281
89%
**57
100%
Lovex S053
<<locked>>
97%
33272
66%
**62
97%
SNPE Vectan BA6 1/2
<<locked>>
95%
30081
59%
**44
100%
[Shooters World Blackout]*
<<locked>>
92%
44556
88%
**93
93%
[Shooters World Buffalo Rifle]*
<<locked>>
96%
44643
88%
**06
94%
Vihtavuori N110
<<locked>>
95%
38058
75%
**24
100%

Max Load - Barrel Length: 23.60''

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AR 2205
<<locked>>
81%
29312
58%
**95
95%
[Accurate 5744]*
<<locked>>
86%
36216
71%
**69
91%
[Accurate No. 11 FS]*
<<locked>>
81%
29138
57%
**57
93%
Hodgdon LilGun
<<locked>>
81%
31662
62%
**08
100%
[IMR 4227]*
<<locked>>
90%
29704
59%
**54
90%
[Lovex D060]*
<<locked>>
88%
36216
71%
**69
91%
[Lovex D063]*
<<locked>>
86%
35969
71%
**65
91%
Lovex S040
<<locked>>
81%
36303
72%
**29
100%
[Lovex S053]*
<<locked>>
81%
21669
43%
**03
91%
SNPE Vectan BA6 1/2
<<locked>>
83%
21640
43%
**63
99%
[Shooters World Blackout]*
<<locked>>
86%
35969
71%
**65
91%
[Shooters World Buffalo Rifle]*
<<locked>>
88%
36216
71%
**69
91%
Vihtavuori N110
<<locked>>
81%
25135
50%
**91
99%

Start Load - Barrel Length: 23.60''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber 

V(0) ... muzzle velocity in feet per second (fps) or  meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍  ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

<<locked>>... you need to buy an access license to unlock the data

bottom of page